Chalice offer white colour tone in the palette of uni metallic shade. Combination with wood or materials with warm-grey tones seem exciting due to the contrast with the metallic effect. The metallic pigment gives the colour an authentic feel of modern design.
Ultra High Gloss
0.8mm Acrylic Sheet
4mm Pressed Panel
Cabinet Doors & Drawer Fronts
PUR Adhesive Lamination
1. Cabinet doors & drawer fronts
1. Acrylic sheet - 2440 (L) x 1220 (W) x 0.8mm (T)
2. Pressed panel - 2440 (L) x 1220 (W) x 4mm (T) - Single sided lamination (PUR adhesive) - Core material MDF (E1 Formaldehyde emission)
3.Completed panel (19mm) - required (L) x required (W) x 19mm (T) - Dual sided lamination (PUR adhesive) - Core material MDF (CARB P2 Formaldehyde emission)
4.Completed panel (25mm) - required (L) x required (W) x 25mm (T) - Dual sided lamination (PUR adhesive) - Mixed hybrid core material
5.Completed panel (36mm) - required (L) x required (W) x 36mm (T) - Dual sided lamination (PUR adhesive) - Mixed hybrid core material
Before use Vivid High Gloss Acrylic Panel comes with a protective film when initially supplied. This film should only be removed when all trade work has been completed in that area. Once it is removed, it initiates the “curing” process (whereby the surface hardens) which takes approximately 72 hours to complete. It is during this period that the surface is the most vulnerable to micro scratches if incorrect cleaning processes are carried out. The removal of the protective film also creates static which can attract other abrasive materials to the surface.
As such, we recommend to strictly adhere to these procedures upon the removal of the protective film: Use Vivid Series Plastic Clean & Shine or Novus 1 Clean & Shine: Shake well and lightly spray onto the surface of the panel
Use Microfiber cloth and wipe using a light circular motion.
This will remove any residue left from the protection film and shorten the duration of the “curing” process.
On-going maintenance We recommends the Vivid Series Plastic Clean & Shine; a powerful cleaning solution for the maintenance of the Vivid High Gloss Panel. It is supplied together with the panel and is available for purchase from our friendly sales executive. This solution:
Acts as a powerful cleaner that does not damage the surface
Removes static from the surface
Leaves a coat of polymer on the surface that aids the curing process and acts as an invisible layer against fine scratches
Resists fingerprints on surface
We also recommend the Novus 1 Plastic Clean & Shine as an alternative that could be purchased off the shelves of DIY shops. It has similar properties as Vivid Series Plastic Clean & Shine. What to avoid Under no circumstance should any of the products below be used to clean the Vivid High Gloss Acrylic Panel surface.